Icemaker manual harvest cyclel - Manual window pontiac grand am 2001 repair
Let me interject one note here: the ice maker was working just fine. These test points can be used to test components and to initiate an ice harvest cycle. Thanks to a few comments I was playing around with the ice machine some more had an idea to try it actually works!
Icemaker manual harvest cyclel. Inserting the jumper between contacts T will energize the timer motor the heater.
I belive it made one cycle of ice then no harvest. A useful handy diagnostic technique when working on an ice maker problem is to manually initiate a harvest cycle to see with the ice maker will will not do.
Then it was moved from one house to another sat in garage storage for 10 days in NJ winter re- connected. Hope this itiating a Harvest Cycle Jump Across T before the blades reach the 10 o’ clock position Modular Initiating a Test Cycle Removing the front cover of the icemaker will expose the test points on the module. Answer Hi Don, depending on the temperature in side the freezer a normal cycle for a icemaker to harvest fresh ice cubes can take any where from 120 min to 180 min. If the icemaker fails to initialize the harvest, a jumper wire ( made from a short piece of 14 gauge electrical wire that has been stripped back ½ inch on both ends) can be used to start the cycle. Rappid Ice harvest cycles now! It sounds like the icemaker is performing to specs, you have to remember it' s only making 7 cubes at a time. The operation of the refrigerator icemaker can be broken down into three cycles; the freeze cycle the harvest cycle the fill cycle.
This covers the removal and repair of a Whirlpool Ice Maker module from a WPWand other Whirlpool models replaced by this part). The symptom is that the ice make will do a manual harvest.
Manual icemaker Wont
1 thought on “ Manually Starting the Harvest Cycle in the Whirlpool- Built Modular Icemaker ” rjbourassa January 28, at 1: 57 pm. Pls forgive what is probably a dumb question. The icemaker ejection cycle is initiated by the thermostat. If, however, the icemaker If, however, the icemaker is not ejecting, it will be necessary to manually initiate an ice ejection cycle.